Crazy Charlie
 



Supply List

Hook: Daichi 2546 #6
Thread:
UTC 140, match color to body
Eyes:
Bead Chain Eyes, silver
Body:
V-Rib, Match color to thread
Throat:
Calftail, Same color as body/thread
Flash:
Pearl Crystal Flash



Instructions:

Step 1: Anchor thread onto hook shank. Cut bead chain eyes so that you have two beads connected. Place near eye of hook leaving enough space to build a head later. X thread over the center of the bead chain eyes 8-10 times tightening it down as you go making sure the eyes stay straight. If you feel they are still loose after this you can wrap thread until you feel it is tight enough.

Step 2: Wrap thread back towards the bend of the hook, tie in the v-rib (for this we are using chartreuse, which is the most popular color), wrap thread forward in front of the bead eyes. Wrap the v-rib forward keeping it tight and being sure to not overlap. Wrap to the back of the eyes, then pull it up and over the eyes between the space. Tie it down and trim excess.

Step 3: If you have a rotary vise, flip the fly over so it is upside down. If not, Pull the fly out and turn it upside down. Take a clump of calftail (You can also use bucktail if you so wish), tie it in base first. You want the calftail to be about 1.5-2 times as long as the hook shank. Tighten it down, trim the calftail bases at an angle from the hook eye backwards.

Step 4: Cut the crystal flash the same length as the calftail, tie it in over the calftail, tighten down, trim excess and tie over the calftail and crystal flash, building a nice even head. Whip Finish. I also recommend cementing the head.


Fishing Notes:
Anyplace you can find bonefish or permit or tarpon. The Bahamas, Belize, Florida Keys, etc. The green and pink version also works very well in Washington on Chum salmon, steelhead and coho in the rivers. And sea-run cutthroat, pink salmon in the sound from the beaches.

Popular Colors: Pink, tan. chartreuse, silver, orange, black and white. I've also seen a blue version not sure if it fishes or not.

 

_____________________________________________________________

General Fly Tying Help
_____________________________________________________________

Bead Size
Hook Size
1.5mm
20-22
5/64" or 2.0 mm
18-20
3/32" or 2.3 mm
16-18
1/8" or 3.2 mm
12-14
5/32" or 4.0 mm
8-10
3/16" or 4.8 mm
4-6
7/32" or 5.5 mm
2-4

Tungsten Bead
Hook Size
5/64"
18-20
3/32"
16-18
7/64"
14-16
1/8"
12-14
5/32"
8-10
3/16"
4-6

Tungsten Conehead
Hook Size
Small 5/32" 4.0 mm
4-6-8
Medium 3/16" 4.8 mm
2-4
Large 1/4" 6.3 mm
1-2-4

 


   
   
 
© Copyright 2007 Creekside Angling Company