Dali Llama
 



Hook:
Gamakatsu B10S #2-4 (Both front shank and for trailer hook)
Thread:
140 UTC or 3/0 Uni, match color to base rabbit
Head:
Nickel Conehead, Jumbo sized
Body:
Crosscut Rabbit, any color
Tail: Rabbit
Strip, same color as crosscut
Second Tail:
Rabbit Strip, any color
Wing:
Saltwater Flashabou, Pearl
Articulated Attachment:
Backing #20-40, preferably gel-spun



Instructions:

Step 1: Slide the cone on the hook. Slide the backing between the conehead and hook shank, through the eye of the hook and back through the conehead. Tie down with thread and Zap-A-Gap. Pinch backing, slide through trailer hook eye, pull loop over the bend of the hook and pull it tight. Set length of trailer by pulling tag end of backing through the eye until you achieve desired length, tie down tag end to front hook, glue.

Step2: Wrap thread around the trailer hook. Tie rabbit strip that matches the crosscut color you have decided to use on the underside of the hook shank of the trailer hook. Wrap near the bend of the hook 5-6 times, pull tight, then avoiding wrapping over the fur, wrap the thread along the shank to the eye, give 4 tight wraps and whip finish.

Step 3: Run the rabbit strip along the backing. (Some guys will thread the backing through the rabbit strip as well, but this way is less time consuming. Either way is effective.) Tie in rabbit strip at the bend of the front hook and glue. Tie in crosscut, glue the shank and wrap forward to the back of the conehead, tie off.

Step 4: Tie in a different colored rabbit strip, cut so that it is just slightly shorter then your articulated hook, making sure that it is directly opposite of the trailing hook gap. Tie in two pieces of flashabou on each side of the fly. Whip finish and viola!

Fishing Notes:
This fly fishes pretty much everywhere. I have used it in Alaska, Wyoming, Montana, Colorado, Utah, Washington, Oregon, etc. I know they work in BC as well as on the Olympic Penninsula for steelhead and trout on the Yakima. You can change the sizes around to match where you want to fish and have at it.

Popular Colors: The most popular colors are Olive/White, Black/White, Purple/Pink, and Pink/White. But much like the MOAL you can create any type of color combination you would like. I like the Baby Blue/Purple personally but remember there is a reason Olive/White and Black/White are sold in fly-shops. They are the best color combos.

 

_____________________________________________________________

General Fly Tying Help
_____________________________________________________________

Bead Size
Hook Size
1.5mm
20-22
5/64" or 2.0 mm
18-20
3/32" or 2.3 mm
16-18
1/8" or 3.2 mm
12-14
5/32" or 4.0 mm
8-10
3/16" or 4.8 mm
4-6
7/32" or 5.5 mm
2-4

Tungsten Bead
Hook Size
5/64"
18-20
3/32"
16-18
7/64"
14-16
1/8"
12-14
5/32"
8-10
3/16"
4-6

Tungsten Conehead
Hook Size
Small 5/32" 4.0 mm
4-6-8
Medium 3/16" 4.8 mm
2-4
Large 1/4" 6.3 mm
1-2-4

 


   
   
 
© Copyright 2007 Creekside Angling Company