|

Hook: Daichi 1120 #18-24
Thread: 8/0 Uni, Olive, Red, Black, Grey or Blue
Bubble: Mini Glass Bead, Peacock
Rib: Brassie Ultra Wire, color can vary
Instructions:
Step 1: Choose
a color of thread. I would stick with olive or black. Tie
the thread on the hook. Build up the body by wrapping thread
back towards the bend then back towards the eye.
Step 2: This part is the only
tricky part. Cut a piece of ultra wire. Fold one end back
towards the other. Slide the bead over both strands of ultra
wire and let it run down the bend. Place the looped section
near the eye of the hook, leaving enough space to tie a head.
Tie down the ultra wire in front of the bead, making 1 loose
wrap and then 2-4 tight wraps. Then wrap behind the bead with
one loose wrap and 2-4 tighter wraps. Cut the loop of wire
in front of the bead off.
Step 3: Cut one of the strands
of ultra wire that protrudes behind the bead. Wrap the thread
over the other strand of ultra wire back towards the bend.
At the bend wrap the thread back forward towards the bead,
building a tapered body up to the bead. Make one wrap in front
of the bead and leave it for now.
Step 4: Wrap the strand of
ultra wire forward towards the bead over the body to create
a ribbing. Wrap to the bead then make one more wrap in front
of the bead. Tie the ultra wire off, trim it and build up
a head. Whip finish and place a dab of head cement.
Fishing
Notes:
It's pretty much all I used on the San Juan. I had
a box filled with these in different sizes and colors. But
I have used it during a BWO hatch on the Yakima, the Ford,
the Gunnison, Flat Creek, and I'm sure it will work on any
spring creek you can think of. I haven't had much of a chance
to fish it here in Washington outside of the Yakima but it
will work anywhere there is a BWO or Midge hatch and the fish
are targeting those food groups.
Popular Colors: This fly
is simple to tie and can be used in multiple colors. I focused
mostly on Olive thread and green wire, but red/red works,
black/silver, black/black, black/green, black/red, red/silver,
gray/silver, gray/green, gray/red, blue/blue, blue/green,
blue/silver. I'm sure there are others that would work, but
those are the main ones I have used.
_____________________________________________________________
General Fly Tying
Help
_____________________________________________________________
Bead Size |
Hook Size |
1.5mm |
20-22 |
5/64" or 2.0 mm |
18-20 |
3/32" or 2.3 mm |
16-18 |
1/8" or 3.2 mm |
12-14 |
5/32" or 4.0 mm |
8-10 |
3/16" or 4.8 mm |
4-6 |
7/32" or 5.5 mm |
2-4 |
Tungsten Bead |
Hook Size |
5/64" |
18-20 |
3/32" |
16-18 |
7/64" |
14-16 |
1/8" |
12-14 |
5/32" |
8-10 |
3/16" |
4-6 |
Tungsten Conehead |
Hook Size |
Small 5/32" 4.0 mm |
4-6-8 |
Medium 3/16" 4.8 mm |
2-4 |
Large 1/4" 6.3 mm |
1-2-4 |
|